The NEW CARBON sole is pretty special and different from all the other soles in the market. The sole is made from Toray MR60, this is a 40Ton High Modulus Carbon Fiber. There are 9 layers in total. The fibers are oriented toward 0°, 45° and 90°.
Each degree pro- vides different features:
0° maximum stiffness and responsiveness
45° incredible tortional rigidity allowing an ultra responsive and firm steering feel
90° strength and durability for long life and consistent high performance.
In the NEW CARBON sole there are 4 layers at 0° orientation, 4 layers at 45° orientation and 1 layer at 90° orientation. The orientation is from inside to outside. The NEW CARBON has also a special “reference table” for the cleat positioning. A porous surface to avoid the use of other materials like the sandpaper.
In 2012 Road models:
PRISMA TEAM 2.0, PRISMA 2.0, RADIAL 2.0, DMT TRI 2.0,TOP TRI, MADISON 2.0
The FG CONCEPT sole is composed of nylon and fiber glass. Rigid and light at the same time. It has a high versatility and it performs well in every kind of bicycle ride, and it has the replaceable studs. Thanks to its excellent performance and guaranteed high levels of comfort, the FG CONCEPT sole is surely interesting to athletes who search for a support in any situation.
In Road models:
IMPACT 2.0, VISION 2.0, VISION WOMAN 2.0, VISION KID 2.0
The new Speedplay® Approved sole from DMT provides a perfectly flat platform which is directly compatible with Speedplay® four-bolt pedal systems. This new sole eliminates the need for adapter plates required when mounting the pedals on shoes with conventional three-bolt soles. Wind tunnel tests have shown the combination of the Speedplay® pedals with DMT shoes employing Speedplay® Approved soles to provide a 33 second per hour advantage over conventional shoes and pedals. Additional benefits include a lower stack height which positions the foot closer to the pedal axle and facilitates more efficient transfer of power. The absence
of adaptors also makes the shoe lighter.
In Road models:
PRISMA TEAM 2.0, PRISMA 2.0, RADIAL 2.0
After extended research, DMT presents a new generation composite sole, created by combining carbon fiber and glass.
The “CG FYBERTEK” sole combines the lightness of carbon fiber with the stiffness of glass, providing a product with properties that are unique for its kind.
In Road models:
ULTRA-LIGHT
DMT-ASL THERMOFORMING insoles help stabilize the foot and provide support that prevents bending of the plantar arch and can alleviate knee torsion.
The air flow system provides ventilation and comfort even at the highest temperatures.
In 2012 Road models:
PRISMA TEAM 2.0, PRISMA 2.0, RADIAL 2.0
The ASL insole is heat mouldable with an airflow system offering ventilation and comfort at high temperatures.
The 3d DMT-ASL insole is made of rigid Eva foam with a ventilated air flow system (fig. 01). This provides stability, comfort and increased breathability even during maximum efforts at high temperatures.
The asl insole can be modelled in the
heel and plantar arch areas through a thermoforming process. This helps stabilize the foot and provides the support necessary to prevent bending of the plantar arch while alleviating knee torsion (fig. 02).
The press zone (fig. 03) allows discharging of excess pressures on the heel area.
Atop is a unique system used exclusively in the cycling shoe sector by DMT. This type of closing, using a rotor to rewind a wire, allows for a perfect upper closing that envelops any type of foot; another strong point is the releasing system of the wire; when you want to open the shoe: just turn the rotor counter clockwise 45°.
Speed and easy in closing make Atop the best closing system.
Lighter and 10mm smaller compared to the previous fastener, at each pulling of the lever the strap closes of 6 mm, allowing exceptional micro-adjustment, adapting to every possible requirement of the foot or the pedalling stroke and enabling extremely easy control even when wearing a shoe cover. To release it just press the red central button.
Drilled tongue with a large thick padding made of nylon mesh and microfiber material: new features that provide maximum comfort and excellent breathability, double fairlead for the Atop closure.
External counter with anatomic support to provide a very high stability in cycling and to increase the constraint of the heel. Anti-shock - Anti-slip.
Design Material Technology...DMT....re-styles its shoes collection following the spirit of its tradition: Italian, Young, Aggressive, Dynamic, Elegant.
The 2X-Density Control closure with external counter is built with different materials: with stiff heel and soft frontal strap have been developed to guarantee the maximum security and comfort at every kind of performance required. Anti-Slip and anti-Tendonitis.
follow us on:
